Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kawamura, Yoshinori; Enoeda, Mikio; Yamanishi, Toshihiko; Nishi, Masataka
Fusion Engineering and Design, 81(1-7), p.809 - 814, 2006/02
Times Cited Count：14 Percentile：68.04(Nuclear Science & Technology)Tritium bred in the solid breeder blanket of a fusion reactor is extracted by passing of a helium sweep gas. Tritium is separated from sweep gas at the blanket tritium recovery system. Palladium membrane diffuser is one of the applicable processes for the blanket tritium recovery system. It is usually applied for hydrogen purification system such as TEP in ITER. However, it has been reported that the rate controlling step changes at lower hydrogen pressure such as the blanket sweep gas condition, and discussion about application for the blanket sweep gas condition is not enough. Recently, conceptual design of the demonstration reactor, named "DEMO2001", has been proposed from JAERI. In this report, the application of the Pd diffuser for the blanket sweep gas condition is discussed based on the condition of DEMO 2001.
Kawamura, Yoshinori; Iwai, Yasunori; Nakamura, Hirofumi; Hayashi, Takumi; Yamanishi, Toshihiko; Nishi, Masataka
Fusion Science and Technology, 48(1), p.654 - 657, 2005/07
Times Cited Count：3 Percentile：24.17(Nuclear Science & Technology)Adding some amount of hydrogen to the helium sweep gas is effective for tritium extraction from blanket, but it causes permeation of tritium to a cooling system. In the design study of a demonstration reactor in JAERI, tritium leakage has been estimated to be about 20% of bred tritium under typical sweep gas conditions. If these tritiums are recovered under the ITER-WDS condition, tritium leakage limitation has to be less than 0.3% of typical case. Water vapor addition to the sweep gas is effective not only for blanket tritium extraction but also for permeation prevention. The reaction rate of isotope exchange is larger than the case of H
, and the equilibrium constant is also expected to be about 1.0. When the H/T ratio is 100, tritium inventory of breeder material is larger than the case of H addition. However it is not so large. In case of HO sweep, separation of tritiated water from helium seems to be easyer, but the process that changes HTO to HT is necessary.
Kikuchi, Taiji; Yamada, Hirokazu*; Saito, Takashi; Nakamichi, Masaru; Tsuchiya, Kunihiko; Kawamura, Hiroshi
JAERI-Tech 2004-026, 28 Pages, 2004/03
JAERI-Tech-2004-026.pdf:2.06MB
Iirradiation capsule for irradiation test of tritium breeder and inner capsule for pebble bed of tritium breeder is inserted. Post irradiation examination of tritium breeder will be performed after irradiation test. On cutting of irradiation capsule, sweep gas line should be sealed to prevent the tritium gas release or inflow of water to sweep gas line. However, general valve and plug cannot apply to sweep gas line sealing because of the effect of neutron irradiation or limited space in irradiation capsule. Therefore, sealing plug for sweep gas line sealing has to be developed. This report shows the development of sealing plug for sweep gas line sealing and operating procedure of sealing plug in irradiation capsule.
; ; ; Tobita, Tsutomu; ; ; ; ; ; Iwamoto, K.; et al.
JAERI-M 85-041, 48 Pages, 1985/03
no abstracts in English
; ; ; Ikawa, Katsuichi; Iwamoto, K.; Yamamoto, Katsumune; ;
JAERI-M 84-054, 65 Pages, 1984/03
no abstracts in English
; ; ; Ikawa, Katsuichi; Iwamoto, K.; Yamamoto, Katsumune
Journal of Nuclear Science and Technology, 19(11), p.889 - 902, 1982/00
Times Cited Count：2 Percentile：32.87(Nuclear Science & Technology)no abstracts in English
